Investigation of the effects of bark fiber as core material and its resin content on three-layer MDF performance by response surface methodology

The effects of using 100% black spruce (Picea mariana) bark fibers as core layer material accounting for up to 70% of the board and its resin content (between 6 and 10%) on the properties of three-layer medium-density fiberboard (MDF) were investigated using a full factorial experimental design with two independent variables and three levels. Five response variables, namely internal bond strength, modulus of rupture, modulus of elasticity, thickness swelling and water absorption were statistically analyzed using a response surface methodology and two-way analysis of variance. The effects of the proportion of core layer (bark fibers) and its resin content on panel properties were significant. All properties studied were positively affected by increasing core layer resin content. The effects of the proportion of core layer (bark fibers) on mechanical properties and water absorption were negative, but positive on thickness swelling. Simultaneous optimization of panel properties indicated that at a density of 850 kg/m³, a three-layer MDF with a core layer resin content of 6.5%, a face resin content of 12 and 60% of core layer proportion (spruce bark fibers) would satisfy the minimum requirements of ANSI standard for 130-grade MDF. Overall, black spruce bark, a major residue source in the Eastern Canada, should be considered as a supplemental furnish for the core layer materials of a three-layer MDF.     

关于"物流工程"本科专业课程内容体系的探讨

通过结合中南林学院“森林工程”专业的深化改革 ,从 2 0世纪 90年代开始 ,先后创办“起重运输工程”本科专业方向和“物流工程”专业方向 ,2 0 0 2年创办“物流工程”本科专业。认为我国“物流工程”本科专业的课程内容体系 ,应该工、管并重 ,其中的工业工程部分 ,目前只能参照传统的工业工程技术系统的划分 ,设置带方向性的“物流工程”本科专业课程内容体系。     

杉木幼林年生长节律划分和相关气候因素分析

杉木幼林年生长规律及气候因素对生长的影响,是合理制订杉木产区区划,改善杉木造林规划设计布局,正确实施经营管理措施的基础。 本项研究,将全国杉木西部试区的四川高县作为试验点,从1985～1988年,连续4年在5～8年生不同密度林分中,作了胸高直径及树高生长的旬期定期观测。经对这些实验数据作均值处理,聚类分析,关联分析和多元回归分析结果表明:对生长在中国杉木中带西部产区,处于中亚热带湿润气候区环境条件下的杉木幼林年生长规律的论证及对影响生长的主要气候因子的分析判断和预测,具有可靠性和区域代表性。     

5种化学杀虫剂防治椰心叶甲试验

对珠海市椰子树林发生的椰心叶甲，使用10％氯氰菊脂、48％乐斯本乳剂、16％虫线清乳剂、81％马拉松乳剂、90％敌百虫等5种化学杀虫剂，进行施药防治对比试验。结果显示：喷施10％氯氰菊酯乳剂0．67ml/L与48％乐斯本乳剂1ml/L的混合液、16％虫线清乳剂5ml/L，杀虫平均死亡率分别为94．2％和93．8％，降低林木受害程度的防治效果分别为76．81％和78．26％，显著高于其它药剂处理的效果。     

神农架地区珍衡植物沿河岸带的分布格局

Due to the importance of riparian zone in maintaining and protecting regional biodiversity, increasingly more ecologists paid their attentions to riparian zone and had been aware of the important effects of riparian zone in basic study and practical management. In this study, 42 sampling belts (10 m×100m) parallel to the bank of Xiangxi River at different elevations in Shennongjia Area were selected to investigate the riparian vegetation and rare plants. 14 species of rare plants were found distributing in riparian zone, accounting for 42.4% of the total rare plant species in Shennongjia Area. The main distribution range of the 14 rare plant species was the evergreen and deciduous mixed broadleaved forest at elevation of 1200–1800 m, where, species diversity of plant community was the maximum at the moderate elevation. The analysis of TWINSPAN divided the 14 rare species into 3 groups against the elevation, namely low elevation species group, moderate elevation species group, and high elevation species group. The analysis of DCA ordination showed similar results to that of TWINSPAN. In the paper, the authors discussed the reasons forming the distribution pattern of rare plant species, and pointed out that the important function of riparian zone on rare plant species protection. Foundation item: This project was supported by National Natural Science Foundation of China (NSFC39970123), and Changbai Mountain Open Research Station, Chinese Acadamy of Science. Biography: JIANG Ming-xi (1965-), male, associate professor in Wuhan Institute of Botany, Chinese Academy of Sciences, Wuhan 430074, P. R. China Responsible editor: Chai Ruihai     

小型农产品分选机设计与试验

针对家庭农场及小规模营销的需要,设计了基于机器视觉的小型农产品分选机。农产品在平胶带上形成多通道阵列式输送,以DSP作为机器视觉单元的核心,采集一帧图像可分析多个通道,并根据农产品的形状、颜色等图像特征进行分选。在水平输送速度为9.2 cm/s、农产品输送间隔为16 cm、4通道并行输送的条件下,选用核桃、红枣及栗子3种农产品进行了分选机性能测试。试验表明,机器能够可靠工作;核桃、红枣和栗子的分选准确性分别为91.66%、94.79%和97.39%;分选速度达8 800个/h。因此采用DSP芯片作为小型分选机的机器视觉核心是可行的,可以为农产品分选机的小型化、低成本提供技术支持。     

射流混药装置结构参数对混药性能影响的模拟分析

以射流混药装置结构优化为目标,采用CFD方法研究了混药装置的嘴管距、面积比和吸入口角度等主要参数对混药性能的影响.用混药装置流动性能的实测值对射流混药装置数值模拟方案进行对比表明,确定的射流混药装置数值模拟方案合理.对嘴管距、面积比和吸人口角度3个参数进行了数值模拟.结果表明:这3个参数均不改变h-q单调递减关系类型;嘴管距和吸入口角度的变化不改变η-q关系类型,但面积比会改变η-q曲线变化趋势.     

耐高压双向椭圆齿轮微小流量计研究

提出了一种基于低偏心率椭圆齿轮转子适用于高压下微小流量计量的双向椭圆齿轮流量计结构,阐述了该种流量计的工作原理,给出了低偏心率椭圆齿轮转子的节曲线及齿廓方程,并设计了样机进行实验研究。实验表明,在31.5 MPa以下,0.05~3 L/min流量范围内的计量精度可达±0.5%,在0.03~3 L/min流量范围内的计量精度可达±1%,具有耐高压、结构简单、精度高、脉动小、可双向计量等优点。     

基于局部综合法的非零正传动弧齿锥齿轮副设计

利用局部综合法对非零正传动弧齿锥齿轮副进行大重合度加工参数设计,克服了非零正传动由于啮合角增大而使得重合度降低的不足。通过实例与常规设计的结果进行仿真与应力分析对比,结果表明,在同样的载荷条件下,新设计比常规设计的小轮最大齿根拉伸应力减小27.6%,最大齿根压缩应力减小23.5%,最大齿面接触应力减小6.5%,同时大轮的齿根应力也有所降低,使得齿轮副具有更高的寿命和可靠性。     

邛海盆地土壤氮素空间变异特征与影响因素研究

以西昌市邛海盆地为研究区域,随机均匀布点采集386个耕作层土壤样点,分析化验土壤理化性质,运用地统计学方法和GIS技术研究邛海盆地表层土壤氮素含量的空间变异特征,利用方差分析、缓冲区分析和回归分析定量分析区域内土壤氮素空间变异的影响因素。研究结果表明,研究区表层土壤全氮和速效氮含量分别为(1.85±0.51)g/kg和(138.5±47.7)mg/kg,属较丰富水平,变异系数分别为27.52%和32.24%,属中等差异强度;土壤全氮和速效氮具有中等程度的空间相关性,空间变异均以随机变异为主,具有各向异性特征,在西北-东南方向上空间变异相对剧烈;研究区土壤全氮和速效氮含量总体上呈条带状或斑块状分布特征,高值区主要位于西昌市的东南郊区,并以此高值中心向南、向东和向北3个方向逐步递减,低值区主要出现在邛海北面近湖岸地带。影响因素分析结果表明,土地利用方式、土壤母质、土壤质地、土壤p H值、城镇、河流、邛海湖对土壤全氮和速效氮空间变异具有显著影响,而道路对土壤氮素空间变异影响不显著。